This article explains how to prevent your kitchen or bathroom cabinets from chipping off paint and how to fix damaged paint.
One of the most common causes of paint peeling is improper cleaning. When dirt and grease are not removed from a surface before painting, it can cause the paint to peel down the road.
Painted surfaces are prone to peeling because they contain moisture. The paint itself contains water, and the humidity in your home causes the paint to expand and contract. This creates stress points where the paint separates from the surface.
So let’s look at a few ways to help prevent this
Causes of paint peeling
A common reason for peeling paint is that the surface was not properly prepared before painting. This means that dust and grime have collected on it, and when you put fresh paint over this build-up, it will start to chip away.
The best way to avoid this is by making sure that the surface is clean before starting to apply coats of paint.
There may be too much moisture in the air if your bathroom cabinets are peeling. While you are using the shower, leave the bathroom door ajar and make sure the ventilation fan works properly.
Paint damage can also be caused by harsh cleaning solutions, leaking roofs, or latex-based paint over oil-based or older paint types.
How to prevent paint from peeling
You can prevent paint from peeling away from your cabinets by cleaning them with abrasive sponges and dish soap and patching up any damage you see with a putty knife, wood filler, and sandpaper.
The quality of the paint and application must be spot on in order for the paint not to peel or chip, which will disfigure your cabinet’s beauty. Vinyl, felt pads, and a small cord can be used to prevent drawers from chipping when they contact the frame.
Before you start sanding, you need to remove all hardware. This includes screws, hinges, pulls, and knobs. Make sure to dust the surface before painting so that there is no debris that could interfere with the adhesion of the new paint job.
Apply a wood sanding block over round edges because the paint will peel off of them – with the goal of protecting the metal underneath. Sanding provides an even and durable base for paint to bond onto rather than just simply brushing it on or rolling it on top.
Once you’ve deglazed (removed any previous coat), use denatured alcohol with steel wool to help remove any old finish and leave a smooth surface for a new coat of paint – preferably a primer.
After sanding, re-sand until you notice peeling occurs all over the cabinet doors. At this point, you should repaint as necessary.
It’s advisable to use water-based paint because it is less complicated and equally durable. In some cases, you might need to apply three coats of paint for adequate coverage.
Make sure to wait at least an hour in between coats, and brush strokes are lighter when starting with light coats. Sand lightly after each coat and give the surface time to dry before applying another coat.
You can use this process on kitchen cabinets but be sure to follow the specific instructions provided by your chosen manufacturer for optimal results.
How to fix paint that is peeling
If your paint is peeling, it’s important to take care of the issue as soon as possible. Peeling paint can lead to a number of problems, including water damage and decay. In addition, peeling paint can be an eyesore and make your home look run-down.
The best way to fix peeling paint is to sand down the affected area and then apply a coat of primer. Once the primer has dried, you can apply your chosen paint color in thin layers.
Be sure to allow each layer of paint to dry thoroughly before applying another. The process will take a few days to complete, but the finished product will last for years.
Once you have fixed the peeling paint, be sure not to clean the surface for at least a month so that the new coat of paint can adhere properly.
Not All Paints Are Created Equal
When painting your cabinets, it is important to use a paint that will last. Not all paints are created equal, and some are of a higher quality than others.
The cost of the paint can be a factor when deciding which one to purchase, as high-quality paints are more expensive. However, the investment may be worth it in order to avoid having to repaint your cabinets in the future.
Visit your local paint store and talk to their experts. They will be able to advise you on the best quality paint to use for your cabinets. You may find they suggest different paints for kitchen cabinets and bathroom cabinets.
When you have cabinets that aren’t hardwood, you’ll need to consider how the paint will apply and whether you’ll get good results.
Do you have MDF or another synthetic material? You may want to skip painting your cabinets. Materials like these won’t sand down as well and are rarely porous. This could cause your paint to peel off.
Remove the doors from the hinges. Rushing this process will cause problems in the long run. Since your doors are vertical, you are going to get paint all over your hinges and risk a lot more drip marks and things.
As well as removing all hardware, make sure you clean the hinges if you’re going to reuse them as well. TSP or some other sort of stripper will ensure that any grime or old paint is removed from the hinges.
Do painted kitchen cabinets hold up
Many people are hesitant to paint their kitchen cabinets because they worry that the paint will chip and peel over time. However, if you take the proper precautions, your cabinets can look great for years.
One of the best ways to protect your cabinets from chipping is to install bumper pads. These pads attach to the edges of the cabinet boxes and doors and help keep them stable. They also prevent any minor scrapes or chips in the paint from becoming major problems.
Another way to protect your cabinets is by sanding them down before you start painting. This removes any loose paint chips and prepares the surface for a new coat of paint. Be sure to cover up any minor scrapes or scratches with painter’s tape so that they don’t show through the new paint job.
Sanding entire doors may seem like a lot of work, but it will provide more protection against chipping than a single door, or cabinet box can offer on its own.
If you’re still worried about how well-painted kitchen cabinets will hold up over time, consider hiring a professional painter who has experience with this type of project. They will be able to ensure that your cabinets look great for many years to come
Best paint for kitchen cabinets
The reputation of oil-based paints as easy to apply and long-lasting that can be scrubbed and cleaned regularly makes them a good choice for most cabinets, but latex paint is widely regarded as the best choice for most kitchen cabinets since it releases fewer VOCs (volatile organic compounds) and dries faster.
Latex paint for cabinets has become easier to use due to new water-based paint formulas. Today, many latex paints are more durable for cleaning and can stand up to cleaning and scrubbing. In your kitchen, look for paint that’s washable or scrubbable.
Preparing the surface before using latex paint is important when painting wood cabinets. Oil-based paint goes on smoothly over wood surfaces, whereas latex paint will show variations in the grain or texture. To make your painting project a success, you’ll need to do some prep work beforehand.
Don’t forget that there are a few different factors you’ll want to keep in mind when choosing the best paint. The first is the type of material your cabinets are made from. If they’re made from a porous material like wood, then you’ll need to use a primer before applying any paint.
Clear protective top coat for painted cabinets
A clear top coat is a protective sealant that you can use to keep your painted cabinets looking new. It’s durable, easy to apply, and dries quickly.
Plus, it comes in a variety of colors, so you can find the perfect match for your kitchen.
What do you seal painted cabinets with?
Polyurethane is a durable, water-resistant finish. It can be used on cabinets that need protection from water and scratches.
It is used in industrial and architectural coating systems for steelwork, concrete, wood, and other substrates. It consists of a polyol resin and an isocyanate hardener.
It’s ideal for sealing the paint after you’ve painted the entire surface.