If you are looking for a long-lasting solution for your bathroom walls, wall panels will offer the best solution. Wall panels make your wall look stylish and could be extended to the shower area and behind the sink to allow the bath splashback. So, can you put bathroom wall panels over tiles?
It is not only possible to put your bathroom panels over tiles, but also achieved easily. Installing panels over tiles is straightforward and pocket-friendly since they are bought in the desirable measure of the size of your bathroom walls without removing the tiles.
To address your desire to make your wall look different using wall panels, keep reading the article. I have described the easiest way of doing it, and it will take you the shortest time possible.
Besides, I will guide you on the significance of using them over tiles or any other material.
How to Install Bathroom Wall Panels over Tiles
Contents
To offer your bathroom a durable decoration, prefer using wall panels. Before ordering the desired panels, ensure you have the correct measurements and go for the best material for a long-lasting solution.
Ensure you have wall paneling, a drill, a trowel, adhesive, mounting hardware, stud finder, dry erase marker, cleaning cloth, level, all-purpose cleaner, level, and sponge to achieve the following procedure.
Clean The Tiles Surface
Using a sponge or microfiber cloth, clean the desired part with an all-purpose cleaner to remove the dirt. Ensure the tiles are spotlessly clean to allow easy bondage between the tiles and wall panels. If water is involved during cleaning, ensure you dry it out.
Define The Placement Of The Paneling
Although this part could be skipped for those putting wall panels on the ceiling, determine and level the top edges that need to go beyond the tiles. Before this, ensure you had accurate measurements for your wall panel to fit desirably. It is advisable to extend it to allow water to splash back.
Mark the Area Of Paneling Placement On The tiles
Using someone’s assistance to hold the panel on the wall, mark it accurately, especially the edges where the tiles are to fit. It can be easily achieved using a dry erase marker. After drawing it accurately, remove the panel slowly.
Apply Adhesive To The Tiles
Since you are confident on where the panel will fit, use the market line to apply the adhesive on the market part. Notably, apply on areas of the market area without leaving patches. Use a caulking gun or trowel to apply and ensure the edges are well applied to minimize openings that allow water in after fitting.
It could be done in a zigzag manner to maximize secure bondage during application. To reiterate, ensuring covering the edges will prevent any leakage, which will bring damage to your wall panel. Apart from this, it will attract molds between the wall and tiles.
Position The Paneling Over The Tiles
After applying the adhesive appropriately, fit the panel on the problematic areas slowly to mark sure it matches the needed space. Also, during fitting, ensure you apply pressure across the board from the top as you slide your hands downwards. As a result, it will increase the solid bondage.
However, for those using hardware instead of adhesive to mount the wall panel, ensure studs are well located before panel installation. Most importantly, pilot the holes through the tiles with the aid of a carbide-tipped drill.
Most importantly, most panels are accompanied by installation spacing instructions for those using a drill.
Why Bathroom Panels Are Preferred Over Tiles
Most people want to spend more time in a bathroom, especially after having a long day. Importantly, you should improve your showering experiences by making your bathroom look stylish and accommodating whenever you get home and walk straight in it.
Making your bathroom look lavish using a bathroom panel is also psychologically connected since a good environment brings peace to mind.
The use of tiles often requires intensive cleaning to avoid increasing chances of permanent stains in your bathroom. Unlike the tiles, bathroom panels are easy to wash even after prolonged colors on the wall that you might not have noticed or have been busy cleaning.
Cleaning the area will take the shortest time possible and require little effort due to their surface material.
Unlike tiles, bathroom panels are cheaper to buy and install. Prices charged for fitting bathroom panels on your bathroom walls accommodate just like the one used while purchasing. Maintaining them is much easier and cheaper since their walls have a flawless finishing.
Most importantly, fitting bathroom panels could be done over existing tiles, while tiles can’t be fitted, giving them a bonus. Installing panels is much easier since all you need is to meet the required leveling along the shower walls.
How To Remove Bathroom Wall Paneling
If you have encountered a fascinating bathroom wall panel that you can’t help buying and replacing the current one, don’t worry; it’s easy to remove it. Ensure you have a drop cloth, protective eyewear, leather work gloves, dust mast, chisel, hammer, crowbar, putty knife, mastic remover, water, towel, or sponge.
Follow the guidelines to remove your bathroom wall panel; it could be not easy compared to installation.
- Cover your floor using a drop cloth and wear a leather glover, safety glasses, and dust mask.
- Remove the plastic or wood placed around the edges of your panels by pressing your chisel along the molded edges. Using a hammer, loosen the molding by hitting the chisel.
- If the molding loosens up, try to grasp it and pull it out. If it does not work, use the chisel to remove the molding all around.
- Place your chisel at the edges where the panel meets the walls or tiles. Hit the chisel using the hammer beneath the paneling as you move around. It will loosen the edges.
- As you avoid putting a hole in your wall, push the end of a crowbar at the loosened corners. To help you pull up the paneling, use the leverage.
- Grasp the loose ends and gently pull them out. If you notice it coming out gently, continue pulling it gently to avoid interfering with the wall material. Some bathroom wall panels are hard to loosen, making it difficult to pull them out. In such cases, use a chisel and a hammer to keep removing it.
In most cases, your wall or tiles will have undesirable marks that need to be removed. If they were tiles, you might have to replace them if the stains won’t come out.
Besides, if you wish to repaint the wall, ensure you remove the adhesive with the aid of a scraper to make it smooth. Before applying the paint, ensure you clean the wall using a towel or damp sponge and dry.
Removing the adhesive that attaches your bathroom pane to the wall or tiles calls for attention to prevent damaging either of them. Most importantly, ensure you are wearing protective gear during this time for your personal safety.
Lastly, it might involve a lot of dust, therefore, ensuring ventilations are open. Open the windows if your bathroom has some.
